Product Details

Facebook
LinkedIn

Water Decoloring Agent

TL;DR This decolorant is a dicyandiamide-formaldehyde resin product. The catalog describes a colorless to light-colored viscous liquid with solids ≥50%.

Colored broke requires a source-to-water decision

This water decolorant identity does not establish direct wet-end compatibility. Trace colored broke, stock, white-water and sheet shade, then assess a segregated water-treatment sidestream only if source and process corrections are insufficient. Read the decision guide and Paper Chemicals family before a technical inquiry.

Selection and quotation

Selection inputs

  • Wastewater or sludge source and variability
  • pH, alkalinity, salts, solids and oil
  • Mixing sequence and separation equipment
  • Liquid quality, captured solids and operating stability

Documents and supply

Send the required specification, quantity, packaging and destination. Request the current TDS and SDS for the offered grade, and confirm which batch documents are available.

Technical documents · Company certificate scopes

Request a quote

Product Description

Compare the application

This decolorant is a dicyandiamide-formaldehyde resin product. The catalog describes a colorless to light-colored viscous liquid with solids ≥50%. Evaluate filtered and unfiltered color, suspended solids, pH and the recovered solids. A coagulation/separation route does not demonstrate that organics are mineralized into carbon dioxide or that COD reaches a discharge requirement.

Catalog reference specifications

These are published catalog references, not a current batch COA. Match the offered grade and measurement basis before comparing offers.

ItemWater Decoloring Agent
Main Componentsdicyandiamide formaldehyde resin
Appearancecolorless or light-color sticky liquid
Dynamic viscosity (mpa.s,20°C)10-500
pH (30% water solution)2.0-5.0
olid content % ≥50
Note: our product can be made upon your special request.

Catalog reference specifications · Compare the application · Prepare a quotation

Frequently asked questions

What does the catalog specify?

This decolorant is a dicyandiamide-formaldehyde resin product. The catalog describes a colorless to light-colored viscous liquid with solids ≥50%. Evaluate filtered and unfiltered color, suspended solids, pH and the recovered solids. A coagulation/separation route does not demonstrate that organics are mineralized into carbon dioxide or that COD reaches a discharge requirement.

What should the trial compare?

Use representative water and preserve pH, alkalinity, solids, mixing, chemical order and the intended settling, flotation or filtration endpoint. Compare liquid quality, captured solids, sludge handling and operating stability together.

What should I send for a quotation?

Send the product or model, required specification, quantity, packaging and destination. Include the application and current product, if known. Confirm the available TDS, SDS, batch documents, storage conditions and commercial delivery terms for the actual offer.

Consult Us Now for Water Treatment Chemical Solutions

We’re Always Here To support

We’re Always Here To support

Request a quote

Post-biological color: diagnose the residual before selecting a grade

Compare the same fresh effluent before and after filtration. If color falls with turbidity or suspended solids, prioritize capture and separation. If filtered color persists, screen an exact decoloring-agent candidate across the real pH and water matrix, then verify COD, final pH, sludge and the downstream separator. Visual clarity alone is not an acceptance result.

Evidence to include with a color-removal inquiry
Water evidenceProcess evidenceDecision evidence
Filtered/unfiltered color, COD where relevant, pH, conductivity, TSS/turbidityBiological process state, existing additions, mixing and separatorAccepted color method, sludge limit, reuse/discharge endpoint and test stop conditions

Read the full post-biological effluent color route guide, compare the broader coagulants and flocculants range, view the paper-mill sequence as a different-matrix example, then request current documents and a test candidate.

Related guide: Wet Strength Agents: Types, PAE Resin & Dosage Guide

Scroll to Top
Request a quote