Shipment
Solid ATMP FCL Loading and Dispatch Checklist
This Short shows solid ATMP packages prepared for full-container loading. It is a procurement page for distinguishing the solid grade from liquid ATMP and releasing the container against the correct records. VCYCLETECH’s product page lists white crystal powder with active acid at 95.0% minimum, chloride at 1.0% maximum, pH at 2.0 maximum for a 1% solution and iron at 20.0 mg/L maximum. Buyers should reconcile bag count and net mass, protect the hygroscopic solid from moisture, inspect the container and package condition, and match each batch to its COA, labels, packing list and seal record.
Watch on YouTube Published
Direct answer
This Short shows solid ATMP packages prepared for full-container loading. For an FCL purchase, specify the solid grade separately from liquid ATMP, match the bag count and net mass to the packing list, and require a batch-linked COA. Moisture protection, pallet or floor-loading method, container condition and destination labels belong in the release check.
Specify the solid grade
The exact ATMP product page distinguishes liquid and solid forms. Its solid specification lists white crystal powder, active acid of at least 95% and pH no higher than 2.0 for a 1% solution; the page identifies CAS 6419-19-8. Put “solid ATMP” and the agreed limits on the purchase order to distinguish it clearly from the 50% liquid grade.
The same page states 25 kg bags for solid ATMP. Confirm the current bag construction, inner liner, palletization or floor-loading arrangement and net mass in the signed order documents.
Loading checks for a hygroscopic solid
The product page describes solid ATMP as highly deliquescent, so packaging integrity and moisture protection deserve explicit checks. Inspect the empty container, protect bags from puncture and water ingress, record seal numbers and photograph the completed load where that is part of the agreed release process.
Reconcile bag count × net bag mass with the packing-list total. If more than one batch is loaded, map each batch to its COA and container position or package marks.
Release document set
- Signed solid-grade specification and SDS.
- COA carrying the shipped batch identifier.
- Packing list with bag count, net and gross mass.
- Container and seal numbers plus destination labels.
- Transport and import documents required by the route.
Receive and retain solid ATMP
Inspect the container seal and interior condition before unloading. Check bags for wetting, tears, caking or unreadable batch marks, and reconcile the unloaded count with the packing list. Separate any affected bags until the supplier and buyer agree on disposition.
Store accepted material under the conditions stated in the current product documents and keep it protected from moisture. Retain a representative sample for each received batch under the buyer's quality procedure. When the solid is used in a blend or water-treatment formulation, record the batch number and first-use date so finished material can be traced back to the FCL receipt. Record the storage location as well, especially when one container supplies several production areas.
Technical specifications
Use these source-linked fields when preparing the sample request, specification or order record.
| Field | Value | Source |
|---|---|---|
| Forms | Liquid and solid | Product page |
| Appearance | Clear colorless-to-pale-yellow liquid; white crystal powder | Product page |
| Active acid | ≥50.0% liquid; ≥95.0% solid | Product page |
| Chloride (as Cl⁻) | ≤1.0% | Product page |
| pH | ≤2.0 for a 1% water solution | Product page |
| Iron | ≤20.0 mg/L | Product page |
Solid ATMP vs liquid ATMP
Use the form-specific column from the product page and name the selected form on the order.
| Specification | Solid ATMP | Liquid ATMP |
|---|---|---|
| Appearance | White crystal powder | Clear colorless-to-pale-yellow solution |
| Active acid | ≥95.0% | ≥50.0% |
| Chloride | ≤1.0% | ≤1.0% |
| pH, 1% solution | ≤2.0 | ≤2.0 |
| Primary logistics focus | Moisture-protected bags | Liquid package and closure |
Solid ATMP FCL-release flow
What should a solid ATMP order specify?
The word “ATMP” alone is insufficient because the product page lists both liquid and solid forms.
- Solid form and active-acid limit
- Bag construction, liner and net mass
- Batch split and COA fields
- Pallet or floor-loading arrangement
- Container, seal, label and destination requirements
Buyer questions
What solid ATMP values are listed on the product page?
The page lists white crystal powder, active acid ≥95.0%, chloride ≤1.0%, pH ≤2.0 and iron ≤20.0 mg/L.
How is solid ATMP different from liquid ATMP?
The current product table lists ≥95.0% active acid for the solid and ≥50.0% for the liquid.
Why is moisture protection important?
The product page describes solid ATMP as deliquescent, so bag and container integrity should be checked.
Which records should accompany an FCL order?
Use the signed solid-grade specification, SDS, batch COA, packing list, container and seal records.
How can a buyer request a solid ATMP quote?
Provide the grade, package, quantity, destination and document requirements through the contact form.
Request a solid ATMP specification and quote